Browse by Tags

Original Article Date: December 2005 Updated: January 2012 You'll find the V8 version of Ranjit Sahai's MSMTOOLS.MA here. Use this set of tools to place breaklines, pipe ends, north arrows, steps, grids, labeled utility lines, and stopbars in your file. It even has a change case tool! Once you've...

Original Tip Date: January 2006 Updated: December 2010 The input focus order vs AccuDraw, Tool Settings and Keyin Window In MicroStation XM / V8i Workspace > Preferences > Position Mapping > Use Position Mapping is turned ON Regardless of where the focus is, you can move it to the Key-in window...

Original Tip Date: January 2006 Updated: November 2011 The setting called called Treat Attachment as Element for Manipulation allows you to use the normal element manipulation tools on your references. You can toggle this switch as you attach the reference, or via the reference dialog. You can also use...

Related Links: Can't select elements or manipulate selection sets?

Original Article Date: June 2002 Updated: July 2011 MicroStaton V8: The graphics below shows a few elements in the active file and a few in the reference file - but which is which? To simplify the volume of on-screen colours, turn on Level Overrides from the View Attributes dialog. From the reference...