Original Tip Date: Feb 16, 2001
Situation: You have a 2D file and need to move the elements to their correct elevations in a 3D file.Attach the 2D file as a Reference to the 3D file. Select Copy Element, snap to the 2D contour, and keyin dx=0,0,100, followed by a Reset. Repeat as needed. Posted to CCM by Chuck Rheault
Additional Info - To move elements in the 3D file to the correct elevation
Select elements - select move element - snap to the elements at their current location and keyin xy=#,#,2350 to move to elevation 2350. This keep there same xy coordinates and moves them in the z. Mike Francisco
AskInga Tip #59