I see a problem with the stair. The drawing of the stairs disappears. See video.
Why this happens?.
AECOsim 08.11.09.225 Dataset_US
I can't seem to reproduce that... All I see when raising the cut plane above the stairs is that the break line symbol disappears.
Hi Steve, this is the problem.
If the section does not cut the stair, I do not see the stair . I only see the numbers of steps.
The representation should be as indicated in the PDF.
I tried it on another computer and windows xp and the problem is the same.
You do not have the same result that the video?
We have the same problem in V8i, reported as ST 8001302237 and ST 8001359167.
It has to do with a plane that is used in the stair symbol to cover things that otherwise would be seen thru the stairs from bellow.
This plane is generated at the wrong height in regards to the generated 2D symbols of the stair when the cut is placed close to or above the stair, ending up covering the 2D symbol as well as things bellow.
This obviously still hasn’t been fixed in V8i and as far as I can tell neither in AECOsim.
My feeling is that it has something to do with language and unit settings. We use a Swedish version and one thing that comes to mind is that we use " , " instead of " . " when denoting fractions of millimetres.
Here is an example, the black shape is the plane I am refering to.
Thanks Mikael, I think that you have found the source of the problem.
I thought it was a problem of my computer.
Thank you for your help.
JoaquĂn
Do you have the ability to try changing the decimal separator?
Yes, but the problem is the same.
Mikael, it looks like the STs you had logged resulted in TR# 337999, but that was against Bentley Architecture Ss1. Are you seeing the same results in the latest ABD with or without the SE dataset?