Use of GeoCoord.system created with GeoGraphics in Bentley Map/PowerMap

Frank_Klein:

Mohammad_Masud:

Can you post the file and the coordsys.dty here? You can also just write the custom values you have used in your definition in a text file and then post that here. Thanks.

Mohammad

 

cordsys.dty wasn't changed, only Datum.dty, Here the files!

Frank

Mohammad_Masud:

Can you post the file and the coordsys.dty here? You can also just write the custom values you have used in your definition in a text file and then post that here. Thanks.

Mohammad

cordsys.dty wasn't changed, only Datum.dty, Here the files!

Frank

I'm using Powermap V8i, very new and in german 8.11.05.18

Frank

Frank,

I suggest using BentleyMap V8 XM, I'm personaly really struggling to setup any custom CS in BentleyMap V8i. I don't think you will have any problems using the older version.

Regards,

Nick.

Mohammad,

This is one example (jpg) of one local geo-Coordinate-System (GCS) we created with MS Geographics 8.5.2.10 de.

Historical living in Germany and doing land surveying, the federal official coordinates are based on an over

100 years old triangulation net based on BESSEL-Ellipsoid but with lot of local shift parameters for 

every federal state and even for smaller regions one or more GCS ( http://de.wikipedia.org/wiki/DHDN). Plane Coordinates are based on Mercator Gauss-Kruger projection.

History but still in use, especially when I'm working with older project data.

And nowadays were going to ETRS 89 in Europe on UTM Projection. So  if I want to do shifts form the

old coordinate systems I'm calculation shifts parameters with identical fix point coordinates with our Leica GPS

Equipment (Software Leica GeoOffice) or I'm using standard affine transformation with plane coordinates that

I have for every Square-Kilometer (UTM/ETRS89 coordinates and local Gauss-Kruger-coordinates published by

the official federal land surveying agency from the federal state rhineland-platinate: https://geodaten.service24.rlp.de)/gkutmpp.zip.

OK, all a little complex, but this is the way the world turns round here.

So I think, there is still the need of the tools: datum editor, and map projection setting for us!

Where are they gone in Bentley Map?

Any suggestions for my future work flow?

Frank

Can you post the file and the coordsys.dty here? You can also just write the custom values you have used in your definition in a text file and then post that here. Thanks.

Mohammad

Hi,

 I have some DGN-files where own Geo coord.system (GCS) are stored. The Geo Coordinate sYstems was created with the Geographics 8.5 Datum editor (Bursa Wolf 7 Shift).

Can I use this GCS in BentleyMap or PowerMap, with the Import GCS form Master oder Refernces, or do I have to create this GCS

in own libraries??

 Regards

Frank