Have you ever wanted to perform a transient analysis on a water network that you've designed? Did you know that you can configure the transient analysis while you design the steady state/EPS water model in WaterCAD or WaterGEMS, then directly open the…
There are many ways that the Bentley’s Haestad hydraulics and hydrology products can help ease the use of working interactively with ArcGIS. Below are the three most commonly used ways a user should be familiar with.
1. Creating shapefiles from…
Have you ever had trouble keeping track of controls or wish there was a faster way to create them? In this short video, see how easy it can be to create pump controls with the Control Wizard in WaterCAD and WaterGEMS.
The video covers the following:
If you're a civil engineer working in the field of site drainage design, you have likely had the need to create catchments based on site topology. The good news is that the days of sharpening your red pencil and manually creating these delineation lines…
A question that comes up every now and again when I talk to users is how do I prepare my GIS data for use in WaterGEMS or SewerGEMS for ArcMap? I find the question usually arises from a need to figure out how to keep GIS data in sync for building a model…
If you're a civil engineer working in the field of site design, you have likely had the need to size detention ponds to attenuate postdevelopment peak flow down to predevelopment rates. Did you know that CivilStorm, SewerGEMS and PondPack include a powerful…