I need estimate the pressure to the fall a bomb when this started to operate. For example, a pump is starting your operation when fall the energy (Shut Down).
How i can do this modelation?
Hello Felipe,
Are you modeling a pump shut down in HAMMER? If that is the case, you would want to set the Transient Pump Type in the pump properties to "Shut Down After Time Delay". There are a couple of sample models that model a pump shut down event. These samples can be found at C:\Program Files (x86)\Bentley\HAMMER8\Samples. Sample models that have a pump shut down include Sample2.wtg, Air_Valve_Example.wtg, and Hydropneumatic_Tank_Example.wtg. In these samples you can see the general setup for a pump shut down event.
There are a number of sources that might be useful for you when using HAMMER. Our TechNotes and FAQs page have a number of topics on HAMMER, including on the protection devices HAMMER uses. The HAMMER V8i FAQ has a lot of good general information on using HAMMER and viewing results.
Regards,
Scott