• State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 82 subscribers
  • Views 1382 views
  • Users 0 members are here
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Section size is not selected or not available

Satyendra Singh Lodhi
Offline

Ref: http://communities.bentley.com/products/hydraulics___hydrology/f/5925/t/119049

Thanks Mr. Scott Kampa & Craig C. This help alot.
Now one more problem is left which is " Section size is not selected or not available" and i have tried to add section size in flex table using globle edit but is showing error i. e. unable to globel edit there are no item are avialable for "size".

Parents
  • 0 Offline

    From your previous thread's screenshot, it looks like you're using SELECTseries 5. This version uses the Catalog Class feature. If you want to use Automated Design to size conduits, make sure to set them all as catalog conduits and select the catalog class and initial size per this article. Make sure you have at least one catalog class configured under Components > Conduit Catalog.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

Reply
  • 0 Offline

    From your previous thread's screenshot, it looks like you're using SELECTseries 5. This version uses the Catalog Class feature. If you want to use Automated Design to size conduits, make sure to set them all as catalog conduits and select the catalog class and initial size per this article. Make sure you have at least one catalog class configured under Components > Conduit Catalog.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

Children
No Data
Communities
Support and Services
Training and Learning
Social Media