This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to Import a Portion of Water Network from one Model to Another in WateGems

Respected All.

Good Day!

I have two models, i want to import data of a particular portion from on model to another. In autocad such type of import is possible though copy paste command. 

Is there anyway to do it  in WaterGems.?

Parents
  • Hello Adnan,

    You can use the feature called submodel, here is the information about import/export of submodel. 

    http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/4539.submodel-importexport 

    Using this feature, you can import/exports parts of your model. 

    Regards,

    Sushma Choure

    Bentley Technical Suppport

    Answer Verified By: Jesse Dringoli 

Reply
  • Hello Adnan,

    You can use the feature called submodel, here is the information about import/export of submodel. 

    http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/4539.submodel-importexport 

    Using this feature, you can import/exports parts of your model. 

    Regards,

    Sushma Choure

    Bentley Technical Suppport

    Answer Verified By: Jesse Dringoli 

Children
No Data