Zero Motor efficiency

Hello Nawnit,

The motor efficiency is defined by the user in the Pump Definition dialog. Open the Pump Definition dialog and go to the Motor tab. The motor efficiency can be entered here.

This information is briefly mentioned in the "Water Power, Wire Power, and Water to Wire Efficiency" section of the Scenario Energy Cost technote found here: communities.bentley.com/.../7242.using-the-scenario-energy-cost-and-energy-management-tools-in-watergems-and-watercad.

Please let us know if you have any additional questions.

Regards,
Scott

I have specified  motor efficiency in Pump Definition dialog  (motor tab)but it's still giving the same result.

Hello Nawnit,

Could you send us a copy of the model to look at? The steps to do so can be found here: communities.bentley.com/.../32255.sharing-hydraulic-model-files-on-the-haestad-forum.

If you upload the model to the Sharefile page, please post here with the name of the file so we know it is available.

Regards,
Scott

Hello Nawnit,

Could you send us a copy of the model to look at? The steps to do so can be found here: communities.bentley.com/.../32255.sharing-hydraulic-model-files-on-the-haestad-forum.

If you upload the model to the Sharefile page, please post here with the name of the file so we know it is available.

Regards,
Scott