Applies To
	Product(s):	AutoPLANT Piping
	Version(s):	AutoPLANT SS4
	Environment:	Windows 7 (64 bit)
	Area:	General
	Subarea:
	Original Author:	Dinesh Solanki, Bentley Technical Support Group

Background

Tracing is like providing an external source to heat/keep temperature of fluid above the certain level. It can be done by steam or electrical wiring.

Steps to Accomplish

Please follow the steps to show tracing in the model.

1. Make sure tracing is defined in the model

Tracing can also be placed in the model using the below steps:

1. Open Component Update Preferences dialog:

 

2. Add Tracing field

 

3. Change the value to "1"

 

2. Go to Project Administrator> Isogen> Input >Option file. Change switch 62 as below, save and exit.

 

 

3. Now, Use import/export to create the isometrics.

Please see below Iso showing Traced line.

 

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!