Applies To
Product(s):	OpenPlant Modeler
Version(s):	08.11.09.XXX (SS5) | 08.11.11.XXX (SS6)
Environment:	Windows 7/8.1/10 (64 bit)
Area:	OpenPlant Specification Generator
Subarea:	-
Original Author:	Rahul Kumar, Bentley Product Advantage Group

In Specification Generator, editable features on sections are available using Section Manager.

Background

With the use of Specification generator, user can modify the section created in it. Renaming it to correct one or by deleting the undesired section can be done using Section Manager available in it. Below are the steps defining few of the salient features of it. 

Steps to Accomplish

1. Launch Open Plant Specification Generator & select project unit.
2. Choose to load a spec through File menu option.
3. After loading the spec, it will list the sections included in spec.
4. Click on Section Manager Icon from top right corner. See image below. 
   
   
   
   
5. Select any section listed under sections box and from right side located icon perform the necessary exercise.
6. User could be able to Move section Up/Down, add/Delete, Rename etc. from the available section Manager option.
7. Save & Close spec to see changes.

See Also

See Help Menu for additional information.

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!