To Pick Reduced Half Coupling under Branch Table Automatically in OpenPlant Modeler


  
 Applies To 
  
 Product(s):OpenPlant Modeler
 Version(s):08.11.09.XXX (SS5) & 08.11.11.87 (SS6)
 Environment: Windows 7 (64 bit)
 Area: OpenPlant Specification Generator
 Subarea: Auto Branch Table - Half Coupling
 Original Author:Rahul Kumar, Bentley Product Advantage Group
  

Overview

To output branch lines with reduced half coupling in OpenPlant Modeler.

Problem Description

With the use of Specification generator, user wanted to update branch table with half coupling and wanted to get it picked up by branch table during placement in Modeler. By default only equal size half coupling gets placed. For Reduced size half coupling user need to perform below steps to get branch table for automatic placement.

Steps to Resolve

  1. Launch Specification Generator. Open spec, say mA1_OPM here.

  2. From Main menu, go to “Tools”, and launch Branch Code editor. See below.



  3. Assign code “HC” for Half coupling from the code list. See below.



  4. From Main menu, go to ‘Tools’, and launch Branch Table editor.

  5. Assign HC code for Same size B/H and assign RT (reducing Tee) for dissimilar size B/H say DN100 XDN80, DN100XDN50 etc. See image below.



  6. Save spec.

  7. From Spec database folder, open mdb file through MS Access. And select “Auto_Tee” table. See image below.



  8. Rename the EC Class Name for PIPE_REDUCING_TEE_BRANCH to HALF_COUPLING. See image below.



  9. Launch OpenPlant Modeler.

  10. Select modified spec in standard preferences dialog. Place header of size DN100.

  11. Enable ‘Auto Branch Table’. Select reducing size DN50 and place it on header. See image below.



  12. It will pick the half coupling. See images below. 

Still a Problem?

If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround. 

See Also

communities.bentley.com/.../13028.openplant-specification-generator

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!