Applies To
	Product(s):	AutoPLANT
	Version(s):	XM 08.09.3.30
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Joey Bertone, Bentley Technical Support Group

Overview

When generating an Iso drawing from AutoPLANT Piping model the error "Plotfile-Prefix must have trailing path delimiter" appears in the Export Progress dialoge and an Isogen DWG or DXF is not created.

Problem Description

The "Plotfile-Prefix must have trailing path delimiter" error is caused because the backslash "\" delimiter was dropped from the PLOTFILE-PREFIX path record in the isogen.fls file. To correct the error a backslash "\" needs to be added to the end of the PLOTFILE-PREFIX record.

Solution

Use the following steps using the SAMPLE_IMPERIAL project and Final Style as an example to correct the error.

1. Go to folder C:\Bentley Plant XM Projects\SAMPLE_IMPERIAL\Config\isogen\final
2. Open the file isogen.fls
3.  Add a backslash "\" to the end of the PLOTFILE-PREFIX entry the record should look like the following;  Please not the "\" at the end of the line.
   1. Incorrect
       PLOTFILE-PREFIX C:\Bentley Plant XM Projects\SAMPLE_IMPERIAL\Config\Isogen\FINAL\DRAWINGS
4. Correct
   PLOTFILE-PREFIX C:\Bentley Plant XM Projects\SAMPLE_IMPERIAL\Config\Isogen\FINAL\DRAWINGS\

• After adding the backslash save and close the file. Isogen will run and a drawing will be produced.

 

Please note that the project and style folder may change depending on the project and style in use.

 

See Also

Product TechNotes and FAQs

Plant TechNotes And FAQs

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!