Cut/Fill - need vertical offset

Hi Aleksandar, could you clarify ? I don't understand your issue. Is it on profile ?

Hi JPLN
I'm sorry, yes. Strictly for annotating in longitudinal profile.
http://prntscr.com/7o97qy
Fill height is in first line, second is cut, third is rail level, and the fifth is existing terrain elevation.
I need my Cut/Fill values to be calculated with difference 0,76m. This problem usually i fix with new profile from vertical alignment copied in -0.76 elevation from the original VA, and then i copy the Cut/Fill line on the first longitudinal profile.
But if there is some easier way it will be great :)

Regards

ok understood. Unfortunately I don't see any easier way to achieve the result. The difference is measured between surface and vertical set in the general leaf. One thing you can do is to have 2 preferences and change accordingly surface and vertical while using the ink lock to keep the first annotation.

ok understood. Unfortunately I don't see any easier way to achieve the result. The difference is measured between surface and vertical set in the general leaf. One thing you can do is to have 2 preferences and change accordingly surface and vertical while using the ink lock to keep the first annotation.