I am trying to create a cross over using connection editor tool. But the connecting alignment is irregular (pls see image below). I had even tried with create connection tool but the result is the same. When i use 'create verticals' tool on such connections, i get the message succesful completion but no vertical elements are created in the vertical alignment file. can any one point out what the error is. THank you.
Thanks for the reply. I had later discovered that the zig Zag lines formed at the turnout locations is due to a wrong parameter in the turnout set in the library. But still i am not able to crete vertical for the turnout connections using connection editor tool. Please find attached the alignment file. THe turnout use is "AREA #5 Straight Split Switch" from the turnout library.https://communities.bentley.com/cfs-file/__key/communityserver-discussions-components-files/5921/Vertical-Algt.alg