Many of the Civil Geometry commands provide a trim extend option as part of the promp sequence. For example, in the beginning of the video below you see the Arc Between Elements command creating curb returns for the intersection. In addition, the Geometry commands are fully integrated with the Microstation Modify commands.
So, whether with the Geometry commands or with the Microstation commands the functions such as…
The inputs from Civil Accudraw can be persisted onto the intelligence of the geometry elements. You must lock BOTH Civil Accudraw ordinates and then the input from Accudraw is automatically persisted onto the point.
In the following video:
In the video below, I show a more complex example of manipulators. This example is three lines made by the Line Between Points command and two curves made with the Arc Between Elements command. The arcs were created by clicking a pass-thru point instead of locking a radius.
Most of the intelligence contained on the Civil Geometry elements is exposed to user by way of on screen manipulators. Simply select the element and the manipulators will appear.
The video below shows the following use of manipulators on a Line Between Points element: