Re: Alignment Stationing "Ahead" and "Back"

Enter -15+00 as the staring station and the next station will be -14+00, and so on.

Use Find and replace to get rid of the "-" signs in Reg Exp mode

Look for the special character in help for start of line - its either $ or ^  and follow it with /- tell it to replace it with nothing.

Simplified situation:

I want to enter the 15+00 at the "start" of my alignment  and backwards station the alignment.

I can enter 15+00 for the start of the alignment, but when I enter "-100" (to decrease the stationing for the station interval) it ignores the negative.  The stationing increases to 16+00, not 14+00.   This has to be possible!

Use the Transpose command on your alignment to reverse the direction of the stationing. I think it is under Geometry>Utilities

Inroads "Survey"

How can I get the stationing to decrease in my horizontal alignment?  Basically I want to have "Ahead" decreasing in stationing and "Back" increasing in stationing.

Situation:  A plan set shows the alignment stationing going from left to right, however the stationing "back,ahead" is reversed on the plan set because the direction the utility flows.

Thanks,

Cory