Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	Drafting

 

Problem:

The first sheet that is created in Plan & Profile Generator is too short.  It does not use the Length that I defined on the Main Tab.  All subsequent sheets are the correct length.

For example, my Start Station is 10+100 and my Length is set to 500.  When I create the sheets, the first sheet is cut from 10+100 to 10+500 - a distance of only 400.  The next sheet is from 10+500 to 11+000 - a distance of 500, which is correct.

Solution:

This is occurring as a result of the Station Lock being enabled. In the InRoads Explorer, go to Tools>Locks and toggle off "Station".