mat foundation with pedestal - 2D and 3D elements - staad help - Structural Analysis and Design - Forum - Structural Analysis and Design - Be Communities by Bentley

mat foundation with pedestal - 2D and 3D elements - staad help

Structural Analysis and Design

Structural Analysis and Design
This is where you can find and contribute to discussions, ideas, and other information about Bentley Structural Analysis and Design products.
Structural Analysis and Design - Forum

mat foundation with pedestal - 2D and 3D elements - staad help

  • I was just trying to analyze a mat foundation with 5 pedestal on it. Some pedestals are square in shape and others are octogonal.

    I modelled the mat using plate element with thinkness of 0.5m. (plate element with 4 nodes)

    pedestals modelled as beam element with 2 nodes. I connected pedestal node to one of the plate element nodes.

    Problem:

    1. As i observed, the forces from pedestals are not transferring to the mat. Does staad can do this kind of analysis...??

    I mean, is it possible to analyze this foundation with 2D and 3D elements together in this model..?

    or

    Foundation should be analyzed using only one type of elements, i.e., either beam elements or plate elements or solid elements etc.

    Kindly propose your suggestions

    Thank you.

     

  • Hi,

    STAAD can analyze this type of structure. Make sure that the beam members have proper connectivity with the plate elements. Else the force from the beam members will not be trasferred properly to the plate elements. You can use "Check Beam Plate connectivity" option (Tools > Check Beam Plate connectivity) to check the connection.

    You can specify the support type as elastic mat or plate mat support. You can go through example problem 27 for more details.