【MSCE C++/CLI】mdlElmdscr_copyParallel模式问题

Question

如下图，对白色CurveVector执行mdlElmdscr_copyParallel，结果为红色线图

已经把工具面板的模式改为斜接了，结果还是一样的，还需要哪里设置吗？

HongQiang Guo · Accepted Answer

void TestOffsetEdge()
{ 
	ElementAgenda selectset;
	SelectionSetManager::GetManager().BuildAgenda(selectset);
	if (!selectset.GetCount())
	{
 return;
	}
	EditElementHandle& eeh = selectset[0];
	mdlSolid_beginCurrTrans(ACTIVEMODEL);
	BODY_TAG body;
	Transform curTransform;
	int result = mdlSolid_elementToBody(&body, &curTransform, eeh.GetElementDescrP(), ACTIVEMODEL);
	if (mdlSolid_isSheetBody(body))
	{
 int numFaces = 0;
 TAG_ENTITY_LIST* pFaceList = NULL;
 mdlSolid_listCreate(&pFaceList);
 mdlSolid_getFaceList(pFaceList, body);
 mdlSolid_listCount(&numFaces, pFaceList);
 for (int i = 0; i < numFaces; i++)
 {
 FACE_TAG pFace = NULL;
 mdlSolid_listNthEl(&pFace, pFaceList, i);
 mdlSolid_uncoverFace(pFace);
 }
 mdlSolid_listDelete(&pFaceList);
	}
	TAG_ENTITY_LIST* pOffsetList;
	mdlSolid_listCreate(&pOffsetList);
	EDGE_TAG pEdge;
	result = mdlSolid_bodyAskFirstEdge(&pEdge, body);
	DPoint3d normal = DPoint3d::From(0, 0, 1);
	double dis = 40;
	result = mdlSolid_offsetWire(pOffsetList, body, pEdge, &normal, dis, 0, 1, false);
	for (TAG_ENTITY_LIST::iterator iter = pOffsetList->begin(); iter != pOffsetList->end(); ++iter)
	{
 if (mdlSolid_isWireBody((*iter)))
 {
 MSElementDescrP elmdscr = NULL;
 mdlSolid_bodyToElement(&elmdscr, (*iter), true, 0, 0, 0, NULL, ACTIVEMODEL);
 mdlElmdscr_transform(&elmdscr, &curTransform);
 EditElementHandle curEeh(elmdscr, true, false);
 curEeh.AddToModel();
 }
	}
	mdlSolid_listDelete(&pOffsetList);
	mdlSolid_freeBody(body); 
	mdlSolid_endCurrTrans();
	result = 0;
}

【MSCE C++/CLI】mdlElmdscr_copyParallel模式问题

Top Replies