【OPM C#】参数化设备参数分组错误

通过二次开发,创建的参数化设备,需要将参数像其它设备一样,归到设计几何分组下,如下图

但实际情况是,放置时,归到杂项里

放置完成后,归到了默认分组里

参数通过Class Editor添加,操作步骤,Supplement Schema》Add OpenPlant_3D_Supplemental_ModelingViews.01.08.ecschema.xml

参数右键》Custom Attributes》Add/Remove》Category  location: OpenPlant_3D_Supplemental_ModelingViews.01.08.ecschema

设置参数见下图

是否还缺少什么步骤?