how to distinguish analysis result for service load case and untimate load case

I have 2 more questions about the Staad Foundaiton Advanced software:

 1.See below figure, I have assigned load case 1000 to 1099 service load combinations and assigned load case 2000 to 2085 ultimate load combinations. But when I check the analyzing result, I found the service load case and ultimate load case are no distinguished.

 2.Can Bently Company provide some design examples for reference for mat foundation strengthreinforcement design? PDF file and Video are both okay. 为了减小项目设计产生的问题,越多越好,只要觉得对基础设计有用的都可以。

Parents
  • 1.分析结果中,左下角为节点位移,右小角为筏板应力。

    2.以位移结果来看,1000号工况(service)的极值均发生在1号网点,其余网点的极值发生在Ultimate工况。

    3.以筏板应力结果来看,1号小板元的极值也是发生在了1000号工况(service)。

    4.您所指的“service load case and ultimate load case are no distinguished” 具体是指那一项或那一条,我还没理解您的诉求和痛点。

    5.关于视频,目前您有四个途径和可以得到:

    a.奔特力腾讯课堂

    b.奔特力优酷官方号

    c.技术工程师通过网盘提供给正式用户的视频链接

    以上三个为国内途径,事实上软件每次启动后,都会在屏幕右侧弹出Bentley CONNECT Advisor视窗,如果您启动的是STAAD,视窗默认会列出STAAD相关的各个等级的视频,如果您启动的是STAAD Foundation,视窗会默认列出Foundation相关的各个等级的视频。Advisor中的视频是面向全球客户,因此均为英文。以下为截图:

Reply
  • 1.分析结果中,左下角为节点位移,右小角为筏板应力。

    2.以位移结果来看,1000号工况(service)的极值均发生在1号网点,其余网点的极值发生在Ultimate工况。

    3.以筏板应力结果来看,1号小板元的极值也是发生在了1000号工况(service)。

    4.您所指的“service load case and ultimate load case are no distinguished” 具体是指那一项或那一条,我还没理解您的诉求和痛点。

    5.关于视频,目前您有四个途径和可以得到:

    a.奔特力腾讯课堂

    b.奔特力优酷官方号

    c.技术工程师通过网盘提供给正式用户的视频链接

    以上三个为国内途径,事实上软件每次启动后,都会在屏幕右侧弹出Bentley CONNECT Advisor视窗,如果您启动的是STAAD,视窗默认会列出STAAD相关的各个等级的视频,如果您启动的是STAAD Foundation,视窗会默认列出Foundation相关的各个等级的视频。Advisor中的视频是面向全球客户,因此均为英文。以下为截图:

Children