ASCE 7-10 1.3.2条只提了一下要验算SERVICEABILITY,但是没有提到具体的荷载组合要求。
请问一下验算SERVICEABILITY应当如何进行荷载组合.
1.3.2 Serviceability. Structural systems, and members thereof, shall be designed to have adequate stiffness to limit deflections, lateral drift, vibration, or any other deformations that adversely affect the intended use and performance of buildings and other structures.
上部结构和基础均会涉及到这个serviceability的问题,STAAD和STAAD Foundation也都可以生成相关荷载组合。
参考
https://communities.bentley.com/communities/other_communities/chinafirst/w/chinawiki/42297/staad-pro-ce
https://communities.bentley.com/communities/other_communities/chinafirst/w/chinawiki/42149/page
祝工作愉快。
Answer Verified By: Zhao Lituo
我想请问一下,美标的规范检验,如果不定义荷载包络,软件针对Serviceability不进行计算,是否是软件本身的设置?换句话说美标的规范检验,staad中必须要定义关于Serviceability的包落,并在设计中定义参数,软件才会对其进行检验?另外检验的结构只能在报告中显示吗,后处理文件中,节间位移与报告中的deflection有什么关系?谢谢
请参考帖子:
(+) 在STAAD中如何使用不同的荷载组合分别检验构件的强度和挠度? - 技术资料库 - Bentley 中国优先社区 - Bentley Communities
本来强度验算和Serviceability验算,就是采用的不同的验算工况。请参考上面的帖子进行验算。
另外,建议您多个问题分开提问,且新开一个问题进行提问,感谢您对我们工作的理解。
另外,关于检验的条文,挠度您可以参考这个帖子进行添加:
(+) 如何在STAAD中进行构件挠度检验? - 技术资料库 - Bentley 中国优先社区 - Bentley Communities
关于节点位移您可以参考下面的帖子:
(+) 节点位移值及构件相对位移值详解 - 技术资料库 - Bentley 中国优先社区 - Bentley Communities (如果您对我的回答满意,还望您可以帮我“Verify Answer”,如果没有解决您的问题,欢迎您继续跟帖提出疑惑,我将为您进一步解答)