https://communities.bentley.com/communities/other_communities/chinafirst/w/chinawiki/52534/mto-grup-summary--en-USTelligent Community 12https://communities.bentley.com/communities/other_communities/chinafirst/w/chinawiki/52534/mto-grup-summary--Tue, 15 Dec 2020 03:21:18 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:e74774c1-d461-4423-86ee-f915f73c3057Qiang Hehttps://communities.bentley.com/communities/other_communities/chinafirst/w/chinawiki/52534/mto-grup-summary--#commentsCurrent Revision posted to 技术资料库 by Qiang He on 12/15/2020 3:21:18 AM<br /> <p>在MTO summary报告中存在两个GRUP SUMMARY报告，一个为所有属于同一group的单元的长度报告，一个为所有属于同一group的单元的重量报告。</p> <p><img src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-04-10/pastedimage1608002423388v1.png" alt=" " /></p> <p><img src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-04-10/pastedimage1608002436294v2.png" alt=" " /></p> <p><img src="/resized-image/__size/320x240/__key/communityserver-wikis-components-files/00-00-00-04-10/pastedimage1608002449140v3.png" alt=" " /></p> <p>以上图模型为例，水平横撑BRH，斜撑BRC，立柱LEG, 分别采用200x2.5, 200x2.5, 200x3.2，立柱中心线水平间距10 m.</p> <p>Out-Out line length (OUT-OUT) -为单元两端相贯线鞍点间距离（圆管），或者单元两端最远点间沿杆件轴向方向的距离（型钢）</p> <p>测试：由于所有杆件采用相同直径，故水平横撑鞍点间距离为立柱中心线间距，即单根水平横撑的out-out line length 为10m，两根为20m.</p> <p>Center line length (CENTERLN)-为偏移后，杆件在模型中的中心线长度。</p> <p>测试：上图水平横撑中心线长度为10m-200/100=8m，两根为16m.</p> <div style="clear:both;"></div>