When installing Bentley Connection Client via SCCM 2012 it is failing, I have tried a few different switches and options to no avail. I also used /layout to create an installation but the issue persists. If I run the same switches from an admin command prompt on a test PC the same installation command works. Please see the below options I have used and the SCCM logs from the install. I have installed previous clients without issue using the same method via SCCM.
So, the previous version I had installed via SCCM successfully was 10.00.18.25, using the following command line
"blg6410001825en.exe" /S InstallDesktopShortcut=0 NoStartPostInstall=1
Here are the methods I have tried with Connection Client 10.00.19.27
"blg6410001927en.exe" /S InstallDesktopShortcut=0 NoStartPostInstall=1
"blg6410001927en.exe" InstallDesktopShortcut=0 NoStartPostInstall=1 /q
"blg6410001927en.exe" InstallDesktopShortcut=0 /q
"blg6410001927en.exe" /S
"blg6410001927en.exe" /q
And the same error resulted with " Process xxxx terminated with exitcode: 4294967295" and in Software Center "0xFFFFFFFF(-1)"
I also performed the layout with "blg6410001927en.exe" /layout choosing noui and no desktop shortcut the using the install files;
{316a7d44-0919-4912-a9e7-a0d67965485e}.lyt
NDP462-KB3151800-x86-x64-AllOS-ENU.exe
Setup_CONNECTIONClientx64_10.00.19.027.exe
In the distribution point and using just "Setup_CONNECTIONClientx64_10.00.19.027.exe" for the installation command with the following result;
"Process 15808 terminated with exitcode: 4294967295" in the AppEnforce.log
Though if I run the command via an elevated command prompt it works.
Please help. Is there an issue with this installer?
Regards, Simon.
It seems to be solved in version 10.00.19.30. 10.00.19.27 cannot be found on the download site anymore.
Confirmed that version 10.00.19.30 functions correctly when deployed via SCCM