Earthwork Issues with SS2

Question

I consistently get an error message and booted out of Microstation when trying to perform earthwork. Specifically on the 'sheet quantity' tab of the earthwork function. When attempting to enter in the second column of quantities (see attached screenshot) Microstation errors out and won't allow me to continue. 
 I have verified this on 3 separate machines all connected to the Geopak license via server license. 
 Is there a simple solution to this?

DeniseBroom · Accepted Answer

When you get this error, have you filled in the Soil Types portion of the dialog? 
 I have seen the program crash before when the Sheet Quantity section gets filled in before the Soil Types. The Sheet Quantity section needs the information provided in the Soil Types to complete the dialog options to know what it is to report in the column.

Craig Jenne · Answer

That was the issue. The soil types were entered in but not populated in the ‘write quantities’ section. It works with selecting the appropriate soil type. 
 
 Thank you for the quick response! 
 
 Craig Jenne, P.E. 
 URS Corporation Southern 
 7650 West Courtney Campbell Cswy 
 Tampa, FL 33607 
 Phone: (813) 675-6678 
 Cell: (813) 520-7580
 ß ---- NEW 
 Fax: (813) 287-8229 
 Email:
 craig.jenne@urs.com

This e-mail and any attachments contain URS Corporation confidential information that may be proprietary or privileged. If you receive this message in error or
 are not the intended recipient, you should not retain, distribute, disclose or use any of this information and you should destroy the e-mail and any attachments or copies.

From: DeniseBroom [mailto:bounce-DeniseBroom@communities.bentley.com]
 
 Sent: Tuesday, April 15, 2014 7:05 PM 
 To: FDOTGeneralGEOPAK@communities.bentley.com 
 Subject: RE: [FDOT - General GEOPAK - Forum] Earthwork Issues with SS2

View and reply online 
 
Replying to this email posts your reply in the thread. 
 When you get this error, have you filled in the Soil Types portion of the dialog? 
 I have seen the program crash before when the Sheet Quantity section gets filled in before the Soil Types. The Sheet Quantity section needs the information provided in the Soil Types to complete
 the dialog options to know what it is to report in the column.