Issues generating existing curb and gutter

RE: Issues generating existing curb and gutter

Sergio Mesquita — Tue, 12 Jul 2016 17:38:10 GMT

Im having the same problem with the 3D curb not being able to extend from the back of curb line to the edge of pavement. I have looked and your videos and did what you did but still no luck. i feel that maybe feature definition on my lines were not done correctly so i wanted to get your input on how to properly define the feature of a line. I have followed the user training manual on how to do this but it seems that only one of my lines has a feature but when i hover the cursor on the top of the line, it does not show me what feature it is. Any help would be appreciated

RE: Issues generating existing curb and gutter

Vern Danforth — Mon, 25 Apr 2016 13:15:37 GMT

NOTE: In the video I omitted a step to "Synchronize" the template in the Library with the linear templates in the file.

1, Select the Template boundary element and hover over the line

2. When the context menu appears choose the icon :Synchronize with Library"

RE: Issues generating existing curb and gutter

Vern Danforth — Thu, 07 Apr 2016 10:25:37 GMT

Just be sure to check the bottom right point on the curb existing template and be sure to

1. Check the Horizontal Feature Constraint box

2. Set the Feature to PavementExisting

3. Set the range to 2 feet

I have attached a quick communities.bentley.com/.../CurbExistingFix.mp4video to help with the steps

This has been set for the current FDOTSS4.itl file.

RE: Issues generating existing curb and gutter

MattSexton — Wed, 06 Apr 2016 19:01:18 GMT

I've had an occasional problem with that too, and I'm still learning Corridor Modeling. I'll be able to get one of my colleagues who is better at Corridor Modeling to get together with us tomorrow on a GoToMeeting and we'll figure that one out too. Shoot me an email and let me know what time tomorrow works for you.

Thanks!

RE: Issues generating existing curb and gutter

Haley Thomas — Wed, 06 Apr 2016 15:36:14 GMT

This worked so that I could see the curb placed in the 3D view. I'm now having issues adding the corridor reference to make it flush with the EOP. Is this a related issue?

RE: Issues generating existing curb and gutter

devildog — Wed, 06 Apr 2016 15:23:55 GMT

Is your corridor on in your project explorer? or get out of the file and then go back in or hit the process corridor

RE: Issues generating existing curb and gutter

MattSexton — Wed, 06 Apr 2016 13:17:37 GMT

Haley,

This is a known bug. You need to uncheck the "Use Feature Name Override" on each of the points in the Template using the Template editor. This will be corrected in the next release of the FDOT software. If you need assistance with this, please send me an email at matt.sexton@dot.state.fl.us and I'll be glad to do a GoToMeeting.

Thanks!