Slow Trim Tools with Civil Elements

I am trying to draw a lot of driveways on this job I am working on. I have lines for the edges of my driveway that are not ruled to anything, along with my line at the R/W that was an offset to the R/W, then I removed the rules and then re-ruled it so it was also a free element not ruled to anything.

Then I created my 15' radii which are ruled to the driveway edges and the EOP. I am trying to trim all these lines so they look correct for the plans and each trim command is taking at least 10 seconds. I have a ton of lines to trim and this is going to take way too long

I am on MR5 and the required Microstation and Geopak..

Thanks

Parents
  • So is this issue just an inherent Microstation issue and I just have to be careful with the length and complexity of my linework? I can only hope when we get connect and access to more RAM and CPU cores that issues like this are resolved.

    Zachary Billings, P.E.

    Senior Roadway Engineer (Licensed in FL and MI)

    CONSOR Engineers, LLC

    System Info:

    Windows 11 | Intel Core i7-13700k | Nvidia RTX 4090 FE | 32 GB of RAM | 2 TB Western Digital Black SN850x NVME

    ORD Version 10.12.02.004 | FDOT Connect Version 10.12.01.00

    YouTube Page for ORD: https://tinyurl.com/BillingsCADD

Reply
  • So is this issue just an inherent Microstation issue and I just have to be careful with the length and complexity of my linework? I can only hope when we get connect and access to more RAM and CPU cores that issues like this are resolved.

    Zachary Billings, P.E.

    Senior Roadway Engineer (Licensed in FL and MI)

    CONSOR Engineers, LLC

    System Info:

    Windows 11 | Intel Core i7-13700k | Nvidia RTX 4090 FE | 32 GB of RAM | 2 TB Western Digital Black SN850x NVME

    ORD Version 10.12.02.004 | FDOT Connect Version 10.12.01.00

    YouTube Page for ORD: https://tinyurl.com/BillingsCADD

Children
No Data