ORD Sheet Index

Is there a trick to moving sheets up and down in the Sheet Index? It appears that ORD will only allow new sheets to be added to the bottom of the index. Is anyone else running into this issue?

Thanks

Blaine

Parents
  • Blaine,

    Yes, unfortunately, that is a known issue at least through 10.09 (haven't tested 10.10 with this yet). There are some workarounds but none of them are particularly enjoyable, IMO. One that I have used and heard others using is to drag the sheets out of the subfolders into the root folder and then drag them back in, in the order you wish. 

    Eddie Giese, PE
    Production Manager | Senior Roadway Engineer | Associate
    Licensed in FL & PA
    ACEC FDOTConnect Instructor on behalf of FDOT

    Patel, Greene & Associates, LLC
    PowerGEOPAK V8i SS10 (08.11.09.918)
    OpenRoads Designer 2022 R3 (10.12.2.4)
    ProjectWise Explorer CE 10.0.3.453

    OpenRoads Conceptstation CONNECT Edition (10.0.16.84)
    LumenRT Pro CONNECT Edition (16.17.60.73)

    premier-scholar-badge road-designer-badge

Reply
  • Blaine,

    Yes, unfortunately, that is a known issue at least through 10.09 (haven't tested 10.10 with this yet). There are some workarounds but none of them are particularly enjoyable, IMO. One that I have used and heard others using is to drag the sheets out of the subfolders into the root folder and then drag them back in, in the order you wish. 

    Eddie Giese, PE
    Production Manager | Senior Roadway Engineer | Associate
    Licensed in FL & PA
    ACEC FDOTConnect Instructor on behalf of FDOT

    Patel, Greene & Associates, LLC
    PowerGEOPAK V8i SS10 (08.11.09.918)
    OpenRoads Designer 2022 R3 (10.12.2.4)
    ProjectWise Explorer CE 10.0.3.453

    OpenRoads Conceptstation CONNECT Edition (10.0.16.84)
    LumenRT Pro CONNECT Edition (16.17.60.73)

    premier-scholar-badge road-designer-badge

Children
No Data