I installed the latest updates last week and have been having quite a few issues with slow performance.
The following hang-ups are occurring:
I have tried compressing files to no avail. I work on local files, typically on my OneDrive files that are on my E Drive. I tried copying to my C drive and there was no improvement. Both of these drives are NVME drives. All of these issues are also occurring on my virtual machine, so it’s not just my home computer.
Then I decided to try to open my files without the workspace. I just right clicked one of my files and hit open. NONE of the issues above were occurring. However, the following was still an issue:
I have posted a video to my YouTube page highlighting these issues: https://youtu.be/c_p2HTRADBU
Has anyone encountered these issues?
I would like to jump on this thread (because this is also related to 10.10.01.00) and also express that the warning dialog about the missing Geotechnical file is very obtrusive for those firms that utilize ProjectWise. Could this check be moved elsewhere in the file opening process rather than the compiled DLL, so that as consultants we could opt to remove it?
Eddie Giese, PEProduction Manager | Senior Roadway Engineer | AssociateLicensed in FL & PAACEC FDOTConnect Instructor on behalf of FDOT
Patel, Greene & Associates, LLC PowerGEOPAK V8i SS10 (08.11.09.918)OpenRoads Designer 2022 R3 (10.12.2.4)ProjectWise Explorer CE 10.0.3.453OpenRoads Conceptstation CONNECT Edition (10.0.16.84)LumenRT Pro CONNECT Edition (16.17.60.73)
Eddie, this is one of about 30 template files that are copied to a workset when a file is opened. It's complaining because the Geotechnical folder is missing in older worksets, and is part of the On File Open process. Bentley has not yet come up with a method to include this file when opening in ProjectWise and when it comes to quantities you will need the templates or build your quantities by hand.
Thanks, Bob. I understand the benefits and the need to pull in template files. We have internal processes in-place to ensure that the proper files are copied into every new project directory that we create for the same reasons you note in traditional Windows fileservers but also in ProjectWise.
I think what would be most beneficial for us as a consultant community (in my personal opinion) would be to make that On File Open process more transparent and customizable. As it is currently, we are "stuck" with whatever happens within that process, whether it fits with our processes or not.