I am using ORD 10.10.21.004 with the FDOT Connect Workspace, latest version. I have a brand-new file where I have started doing some cross-slope correction. I have three Views open: Default model, Default3D, and Cross Section. Going from Default View to either Default3D or XS is seamless; there is no discernable lag, I just start working in that view. If I am in either the Default3D or the XS view, and try to switch back to Default, there is about a 10-15 second hang that occurs where ORD is not responding. After that time, I am able to work just fine, but this hang is slowing me down quite a bit.
I do not have Explorer or Properties open, as I know this was the cause of hanging / not responding issues I was having previously when switching views in this manner. This hanging issue is being caused by something else I have yet to determine. Several others on my team have reported this issue as well.
Has anyone encountered this issue?
Thanks
We've stayed with 2021 R1 (10.10.21.003) for now since it keeps things more consistent between other client workspaces. It seems to work fine with FDOT's latest. I know .004 is what they've certified. Frankly not sure why FDOT released it on 004 and why Bentley is calling this release a minor release despite a fairly significant "speed boost". You may consider going back to 2021 R1 due to many other community issues with R2. A few issues found below... For us, these were secondary reasons to staying on R1.
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/233189/ord-2021-r2-undo-command-causing-crashes
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/226224/ord-ce-2021-r2---change-name-and-feature-definition-disabled/698332#698332
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/232759/ord-2021-r2-vertical-point-control-not-working-on-linear-template/722419#722419
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/227856/ord-10-10-massive-lag-with-named-boundary-command-in-existing-files/704625#704625
Bentley Accredited Road Designer | Bentley Accredited Road Modeler
colliersengineering.com
I wasn't aware there was a .003 release. I recall being on some other release between the initial 10.10 release and the current, but I think it was a different number entirely.
Thanks for posting all those other bugs. I have certainly experienced some of those, especially the ridiculous slow undo.
It's been very frustrating being a glorified beta tester for almost three years now. Maybe someday they will get this thing right..
I did seem to find a fix that I posted in a reply to Eddie, so I think I am good for this particular issue.
Thanks again
Zachary Billings, P.E.
Senior Roadway Engineer (Licensed in FL and MI)
CONSOR Engineers, LLC
System Info:
Windows 11 | Intel Core i7-13700k | Nvidia RTX 4090 FE | 32 GB of RAM | 2 TB Western Digital Black SN850x NVME
ORD Version 10.12.02.004 | FDOT Connect Version 10.12.01.00
YouTube Page for ORD: https://tinyurl.com/BillingsCADD