ORD Hangs When Changing Views

RE: ORD Hangs When Changing Views

eddiegiese — Tue, 20 Sep 2022 15:14:27 GMT

Appreciate the follow up! This is really good information.

RE: ORD Hangs When Changing Views

Zachary Billings — Tue, 20 Sep 2022 13:37:23 GMT

I wasn't aware there was a .003 release. I recall being on some other release between the initial 10.10 release and the current, but I think it was a different number entirely.

Thanks for posting all those other bugs. I have certainly experienced some of those, especially the ridiculous slow undo.

It's been very frustrating being a glorified beta tester for almost three years now. Maybe someday they will get this thing right..

I did seem to find a fix that I posted in a reply to Eddie, so I think I am good for this particular issue.

Thanks again

RE: ORD Hangs When Changing Views

Zachary Billings — Tue, 20 Sep 2022 13:29:27 GMT

I think I might have determined what was causing my problem. We are working on a milling and resurfacing project with cross-slope correction for about 26 miles. Whoever set up the alignment file and baseline used the existing terrain as the active profile. I have had issues with this in the past as it produces a lot of data points for ORD to read every time it looks at that alignment.

So, I went in and drew some lines on top of the existing ground, essentially created a profile based upon the existing ground made up of curves and tangents. When I go back into the file I was having issues with and process my corridors, I am no longer having the issue I was having.

I need to see if the next file I work in is also fixed, but I think that may have done it.

RE: ORD Hangs When Changing Views

Shawn Cooke — Mon, 19 Sep 2022 12:56:16 GMT

We've stayed with 2021 R1 (10.10.21.003) for now since it keeps things more consistent between other client workspaces. It seems to work fine with FDOT's latest. I know .004 is what they've certified. Frankly not sure why FDOT released it on 004 and why Bentley is calling this release a minor release despite a fairly significant "speed boost". You may consider going back to 2021 R1 due to many other community issues with R2. A few issues found below... For us, these were secondary reasons to staying on R1.

https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/233189/ord-2021-r2-undo-command-causing-crashes

https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/226224/ord-ce-2021-r2---change-name-and-feature-definition-disabled/698332#698332

https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/232759/ord-2021-r2-vertical-point-control-not-working-on-linear-template/722419#722419

https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/227856/ord-10-10-massive-lag-with-named-boundary-command-in-existing-files/704625#704625

RE: ORD Hangs When Changing Views

eddiegiese — Mon, 19 Sep 2022 12:14:15 GMT

Yes, we have also run into this. Not sure if there's a real solution, but we did find that we were having issues in particular with the dynamic views. When this is happening in one file in particular, we've resorted to deleting the dynamic XS view (GEOMETRY DYNAMICSECTION DELETEDXSVIEWS) which seems to at least temporarily resolve the problem. You will need to regenerate the dynamic XS view and you may lose any manual edits to that view as well (i.e. manually drawn MicroStation lines).

Can I ask, do you have any points in your template(s) that are using Project to Surface as a constraint? I have a theory this is causing the issues, but have yet to prove it.