How Do I Change Linear Stroking for Linear Template?

I have a linear template that I would like to drop at 1 ft intervals. I changed CIVIL_DEFAULT_LINEAR_STROKING from 50 to 1 in the workspace configuration, saved the change, saved settings, closed SS10, and then reopened it and my template is still drawing at 50 ft intervals. Can someone please help with this? Thank you in advance.

Parents
  • You changed the default linear stroking for any new elements, not ones that have already been drawn. First, I would suggest a default linear stroking of 5 or 10'. Next go the line the linear template is built in and go into the properties of the line and change the linear stroking to 1. That will change just that line. Once you do that, the linear template should follow suit assuming you have the Final design stage set for that linear template. 

    Answer Verified By: Joe Moslemian 

Reply
  • You changed the default linear stroking for any new elements, not ones that have already been drawn. First, I would suggest a default linear stroking of 5 or 10'. Next go the line the linear template is built in and go into the properties of the line and change the linear stroking to 1. That will change just that line. Once you do that, the linear template should follow suit assuming you have the Final design stage set for that linear template. 

    Answer Verified By: Joe Moslemian 

Children