I am getting the following error when trying to run the VBA - Drainage Stub-Out Report from the FDOT menu.
I have the Geopak project manager open to the current project as well as the Geopak Drainage project open. I have an active network set. Once I select OK I receive this dialog box
I pick the browse icon and then get this dialog box\error
I have looked on the Microsoft side to see if there is some bogus add-in or startup form for Word and Excel and found nothing. I also repaired Office 2010. Any help would be appreciated.
FDOTSS4
MSV8i SS3 - 08.11.09.714
Geopak SS4 - 08.11.09.845
Zachary Billings, P.E.
Senior Roadway Engineer (Licensed in FL and MI)
CONSOR Engineers, LLC
System Info:
Windows 11 | Intel Core i7-13700k | Nvidia RTX 4090 FE | 32 GB of RAM | 2 TB Western Digital Black SN850x NVME
ORD Version 10.12.02.004 | FDOT Connect Version 10.12.01.00
YouTube Page for ORD: https://tinyurl.com/BillingsCADD
Answer Verified By: Sean Keene
Christiana,
I realize this is an old post but I was wondering if you could send me the OCX files from the issue I was having previously? I have one machine that will not produce the stubout report and I cannot find the OCX files you sent me previously. I want to check to see if the machine has the correct OCX files and if they are registered.
Thanks
Sean,
It's not likely that it's the same issue as it was 5 years ago, unless the user is still using Windows XP. Send me the users contact info and i will takke a look at the problem.
Robert.thorburn@dot.state.fl.us
Answer Verified By: Bob Thorburn