MicroStation V8i (SELECTseries 4)
FDOT Sheet Navigator Version: 03.30.30
Hello,
I would like to manually modify the SheetDescriptions element in the SheetInfo.xml document and have these modifications applied to the sheets when the "Finish and Apply Renumbering" is run. I cannot get this to work.
Here are the basic steps I am following:
After this process it does not modify the sheet descriptions that were entered into the xml document as I expected, it is still pulling them from the dgn text.
The ultimate goal here is to create a “helper tool” that modifies this xml document helping with the sheet descriptions.
Any help would be greatly appreciated, thank you.
David,
I'm not sure there is a way to get Sheet Navigator to recognize and apply modified data in the SheetInfo.XML, however what you're trying to achieve can be easily done through the multi-edit mode. Feel free to give me a call at your convenience and i'll be glad to step you through the process.
Thanks!
Matt SextonCADD Applications Support CoordinatorFlorida Department of TransportationEngineering/CADD Systems Office850-414-4840matt.sexton@dot.state.fl.us
Thanks for the reply Matt! I'm going to get with our guys to take another look at multi-edit mode and see if it meets their needs.