MicroStation V8i (SELECTseries 4)
FDOT Sheet Navigator Version: 03.30.30
Hello,
I would like to manually modify the SheetDescriptions element in the SheetInfo.xml document and have these modifications applied to the sheets when the "Finish and Apply Renumbering" is run. I cannot get this to work.
Here are the basic steps I am following:
After this process it does not modify the sheet descriptions that were entered into the xml document as I expected, it is still pulling them from the dgn text.
The ultimate goal here is to create a “helper tool” that modifies this xml document helping with the sheet descriptions.
Any help would be greatly appreciated, thank you.
Thanks for the reply Matt! I'm going to get with our guys to take another look at multi-edit mode and see if it meets their needs.
David,
I'm not sure there is a way to get Sheet Navigator to recognize and apply modified data in the SheetInfo.XML, however what you're trying to achieve can be easily done through the multi-edit mode. Feel free to give me a call at your convenience and i'll be glad to step you through the process.
Thanks!
Matt SextonCADD Applications Support CoordinatorFlorida Department of TransportationEngineering/CADD Systems Office850-414-4840matt.sexton@dot.state.fl.us