Ran into a problem using the FDOT Place Civil Cell tool using an urban driveway cell.
The command promoted to select the edge of the pavement, sidewalk back, and left side of the driveway to place the cell.
When followed, the orientation of the cell is out of place and there is no obvious fix to switch the orientation using the three reference lines.
Are there any resources that would help point me to solve this problem? Thanks.
Is this a 2D cell or 3D cell? If 3D, those lines may need active profiles on them. You may need to keep the EOP and BOS lines running through the section prior to placing the cell. Also try extending the Left side of driveway a bit further back. When placed, clip those lines as needed. There may also be options (an arrow prompt) before the final placement accept click. Try clicking on the arrow prompt to flip its option/direction. Civil cells can be tricky since they contain a particular process and feature order. See the following video. Starting at 10 minutes (41 minutes for 3D portion) should explain. https://www.youtube.com/watch?v=RjL9YYDOYuY&t=2s
Thank you for your help. It's a 2d cell. And I have used the video and followed it closely before coming to this forum for help. The thing is the I have tried all the arrow prompts, and it would not allow me to change the direction of the cell to the other side. I will try extending the driveway line to see if that helps.