Converting workspace from V8i/SS10 to CONNECTS/ORD

RE: Converting workspace from V8i/SS10 to CONNECTS/ORD

Taylor Mansfield — Fri, 04 Nov 2022 20:42:56 GMT

Bulbul,

The ProjectWise Work Area can be retrofitted to enable it for ORD but your files that were started in SS10 will require a manual process to upgrade to the ORD schema, unless they'll just be reference files and you'll create brand new design files in ORD. I recommend closing the project out in SS10 since it's already at 60%, but it is possible to upgrade them. The Divisions can assist with retrofitting the Work Area to enable ORD but can't provide assistance on upgrading the SS10 files.

RE: Converting workspace from V8i/SS10 to CONNECTS/ORD

Bulbul Ganguly — Wed, 02 Nov 2022 12:34:42 GMT

I have the model created and all the sheets have been created as well. I guess that means I stay with Geopak? The project is letting in 2027, so we have time between now and then and if I convert it now, I can take advantage of the new tools as projects go through numerous changes till it is finally lett.

RE: Converting workspace from V8i/SS10 to CONNECTS/ORD

Steve Phipps-C — Wed, 02 Nov 2022 04:25:34 GMT

TxDOT recommends that projects beyond the Alignment stage remain in Geopak. However, if all you have created is an alignment then you can covert to ORD.