LEARN COMMUNITIES - FORUM ~ DISBANDED?

I recently received an email that said that"

The thread MicroStation Select For Beginners was moved to LEARN Communities - Forum.

So I wanted to check out that thread, but discovered that neither of the links take me to an actual active page.  Did the post get moved then deleted?  Was that whole forum made inactive?  If I do a search in communities by the thread title I can see the body of the thread in the results, but neither link still works from the search result.

Mike Linderer

Parents
  • Hi Mike,

    Sorry for the delay in response. The "LEARN Communities - Forum" has been disabled, but was visible to the moderator who accidentally moved your post there. This is why you were not able to see it after it was moved, and why nobody else could see it.

    The thread you mentioned in your post however, is currently in the valid, Bentley Institute Forum: MicroStation Select For Beginners 

    I noticed it was posted by someone else though - Fraser Gillespie. Do you still need assistance with MicroStation training? If so, it may be best to post on the MicroStation forum. I can also make sure that someone contacts you with the information you need. Generally speaking our training is available on learn.bentley.com. 


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows Products
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

    Answer Verified By: Linus Linderer 

Reply
  • Hi Mike,

    Sorry for the delay in response. The "LEARN Communities - Forum" has been disabled, but was visible to the moderator who accidentally moved your post there. This is why you were not able to see it after it was moved, and why nobody else could see it.

    The thread you mentioned in your post however, is currently in the valid, Bentley Institute Forum: MicroStation Select For Beginners 

    I noticed it was posted by someone else though - Fraser Gillespie. Do you still need assistance with MicroStation training? If so, it may be best to post on the MicroStation forum. I can also make sure that someone contacts you with the information you need. Generally speaking our training is available on learn.bentley.com. 


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows Products
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

    Answer Verified By: Linus Linderer 

Children