OpenPlant Modeler Fundamentals - On-Demand - 00-Getting Started - OPM_Imperial Datasource Missing

We are enrolled for OpenPlant Modeler Fundamentals Imperial - On Demand training. In the first course it is asking to connect OPM_Imperial datasource. We do not have information on this datasource connection in ProjectWise.

I found a related question (see link below) here offline files were sent for the training course. Please send us the required files for this training course "

communities.bentley.com/.../271984

Parents
  • Hello Sandeep,

    You will need to be enrolled in the OpenPlant Modeler – Stand Alone course which is intended for On-Demand use. The course requiring connection to the Datasource is intended for an instructor lead course in which the instructor provides a VM with the datasource environment. The datasource setup is too large to download for On-Demand users.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

Reply
  • Hello Sandeep,

    You will need to be enrolled in the OpenPlant Modeler – Stand Alone course which is intended for On-Demand use. The course requiring connection to the Datasource is intended for an instructor lead course in which the instructor provides a VM with the datasource environment. The datasource setup is too large to download for On-Demand users.


    Regards,

    Jesse Dringoli
    Technical Support Manager, OpenFlows
    Bentley Communities Site Administrator
    Bentley Systems, Inc.

Children
No Data