Liadh Keogh's Activities

Cone resistance formatting

Liadh Keogh — Mon, 07 Nov 2022 08:31:26 GMT

Hi all,

I am using Datgel with gINT to create CPT logs. When I create the logs, a black triangle appears with the cone resistance. As these are offshore CPTs I wish to remove this trainagle. Is this possible?

Thank you in advance.

No Strata Main Input Option

Liadh Keogh — Fri, 21 Oct 2022 10:48:51 GMT

Hello,

I am trying to add an engineering description for CPTs in a CPT log. To do this I am enterring interpreted soil descriptions under the Strata Main option on gINT. However, when I go to the Strata Main tab there are no rows in which I can enter data and no options to add rows. All other Main Group Input tabs seem to be working without issue.

I have done this before no problem before with CPTs so I am wondering what the issue may be? Thank you very much in advance!

Missing shear strength values on CPT logs

Liadh Keogh — Tue, 11 Oct 2022 09:18:52 GMT

Hi All,

I am using Datgel in order to create VC/CPT combination logs. For some clay layers, the shear strength is not being calculated or shown in the CPT data table. I am wondering how I can fix this in order to have all shear stregth values plotted.

Thanks in advance!

CPT and VC Point ID on a Combination Log

Liadh Keogh — Tue, 04 Oct 2022 14:47:03 GMT

Hi all,

I am using Datgel with gINT in order to create CPT logs which have a corresponding vibrocore material column added. On the log I wish to show both the CPT pointID and the VC point ID. However, the logs produced only show the CPT Point ID. Is there any way which I can have both Point IDs shown? Thanks in advance!

Log Report - Smoothing Data

Liadh Keogh — Fri, 05 Aug 2022 07:31:23 GMT

Hi there,

I am using the Datgel CPT Tool gINT Add-In to create CPT reports. During sampling some depth intervals were missed (eg. measurements jump from 1.55 m to 1.75 m). This is causing gaps in the reports where data was not measured. Is there a way that I can smooth over this data so that there are no gaps in my report?

Many thanks in advance.

Adjust horizontal scale in CPT plot

Liadh Keogh — Mon, 01 Aug 2022 12:15:17 GMT

Hello,

I am new to gINT and am creating CPT plots. However, when I create PDF reports of the CPTs many of the qc values are beyond the limit of the x-axis scale. Is there any way in which I can increase the scale of the qc column so that all data is included?

Thanks in advance!

Ask A Question I

Mon, 01 Aug 2022 02:08:41 GMT

Ask a question in a forum.