muhoja chanzi's Activities

How to hatch a corridor with a color

muhoja chanzi — Sun, 19 Mar 2023 16:53:13 GMT

i want to hatch the the carriage way and the shoulder with a color..please help..an using ss2

anyone with a civil xin that has side lope labels i.e (back slope,inner slopes)

muhoja chanzi — Mon, 06 Sep 2021 18:08:51 GMT

have been trying to label the back slope and side slopes but it has not been labeling it well it has been mixing sometimes 1:3 and sometimes 1:4 while all my slopes are set to 1:2..tried several times it failed.anyone who has a metric template and a civil xin that has those settings for me to use..please help

Template situation in creating intersection

muhoja chanzi — Sat, 07 Nov 2020 14:30:51 GMT

communities.bentley.com/.../INTERSECTION-FILES.rari have been trying to create intersection for several times months ago but nothing worked later on i realized that there is template problem from what i think..i have a half template for the right hand side(RHS) and for the left hand side (LHS). can someone help me check my template is named RIGHT AND LEFT in the folder named TRAINING TYPICAL.Please check if something is wrong and may you please try to fix it for me.i have used the full template named (TYPE 5(9.5M LAYERS)(0.5)2.5% SLOPE.May you check that one too.Am using INROADS SS2

i have some files i here by attach

communities.bentley.com/.../3312.FINAL-ROAD-TEMPLATE.itl

Profile pipe network (not displaying the first structure as an ellipse)

muhoja chanzi — Sat, 18 Apr 2020 07:29:19 GMT

I have read some of the solutions in this forum but have not yet found the solution..i have been trying to add profile structures to an existing profile i was able but the first structure does not display circular/ellipse form of a structure it displays 2 line the upper line and the lower line it is cross sectioning the pipe instead of viewing the ellipse form but the the rest of the structures are fine..how do i solve this i need it to display the ellipse shape not the two lines and if label labels only the first the rest of the structures are not labelled..why is this happening.

Vertical middle axis not yet displayed

muhoja chanzi — Sun, 29 Mar 2020 20:51:15 GMT

Have been creating plan and profile in the plan and profile generator options when i started creating it displayed such message that vertical middle axis not yet displayed.i don't know what was the meaning of that then later on the profile on the gradient and distance band/row it showed empty no information displayed as seen

and also not only that also this one displayed an empty band/row

Please help me fix this and why is this happening..?

Please help with the Profile elevations shifts

muhoja chanzi — Fri, 27 Mar 2020 13:57:28 GMT

Have a profile that the gradients are very steep i want to split the views to fit on the frame..when i set to do not shift the profile, it does not fit on the frame i tried setting to shift at Minor Stations it split the profiles to 2 some of them to 3 which is fine but when i go to annotate it split the annotations also as the that each profile view has its annotation but i have only 9 plan and profile views only but when i want go to annotate the list is added..That annotation options also counts those splited views as part of annotations while i want only a single annotation for a full length profile that has been splited twice or thrice whatever the case but only 1 annotation frame but instead i get multiple annotation frames as seen below.

i tried annotating 2 of them it looks as seen on the image

and also another profile looks like this annotation option draws the line between them its like there 2 different profiles.

also another it omits some information's as seen the band/the vertical geometry annotation row did not finish to the end of the profile

and one of the profile after being annotated also exceeded the superelevation diagram row as seen here

How do i fix this and why is this happening..please help i didn't know that i would come to this situation ,have to submit this to the consultant after 2 days from this day..if anyone who knows how to fix this please help me.

How do i omit the negative sign in station equation

muhoja chanzi — Thu, 26 Mar 2020 19:31:09 GMT

I have a range of stations going back how do i omit the negativity cause have been dealing with the horizontal alignment for hours now on the station equation part..

And sorry to ask will the profile chainages appear with the negative sign and if yes how do i remove those negative signs.

Am using inroadsSS2

Sorry am re posting again have not been answered.Template disobeys the slope ratio that have set

muhoja chanzi — Fri, 20 Mar 2020 18:01:23 GMT

I have created a template with a slope ratio of 1:2 but it displays 1:3 how do i solve this tried several solutions but still yet failed to solve.

only on cut sections is where there is drain is displays 1:3 but on fill section it displays 1:2..

on cut sections is as seen

and on fill section to the left displays fine but to the right the same problem exists

Please help me fix this am expecting to submit this two days if i will succeed on this...sorry my consultant needs this by tomorrow..if there is a possibility of any help i would be glad thank you

communities.bentley.com/.../FINAL-ROAD-TEMPLATE.itl

The Templates am using are in the folder TYPE 1 8M WIDTH

Template Named : TYPE 1 (8M (LAYERS (0.35)

TYPE 2 (8M LAYERS (0.45)

TYPE 3 (8M LAYERS (0.5)

TYPE 5 (8M LAYERS (0.6)

TYPE 6 (8M LAYERS (0.65)

These are the templates that am using..

After fixing the issue it will be better for me to know what was the problem to avoid asking again...Thank you

Anyone who knows how to create 2 plan views and 1 profile that has total length of the 2 plan views.

muhoja chanzi — Tue, 24 Mar 2020 17:25:45 GMT

Have been trying to create double plan view and a single profile view for the all day but i failed i want a double plan views and full profile that has covers the length of those two plans.

Please help

How do you annotate POB and POE without annotating the PI in Profile

muhoja chanzi — Mon, 23 Mar 2020 08:28:52 GMT

Am using Inroads SS2 have been trying to label the POB and POE in Profile without labeling the PI for several times have failed how can I accomplish this.

WHY DOES THE CORRIDOR NOT DISPLAYING

muhoja chanzi — Mon, 02 Mar 2020 11:36:41 GMT

Have created a corridor on the roadway designer it doesn't display but on the cross sections the components are there

but on the alignment there is nothing is displayed only the alignment

How do i solve this

HOW DO I ANNOTATE CARRIAGE WAY AND SHOULDER SLOPES ONLY

muhoja chanzi — Mon, 02 Mar 2020 11:18:10 GMT

I tried annotating the carriage way and shoulder for several hours still it labels fill slopes and the ditch have checked the segments nothing is displayed as seen on image

Also i tried checking the components

when i go to annotate the cross sections are as seen

i just want only the carriage way and shoulder slopes only...please help

PROPOSED CROSS SECTIONS EXCEEDS THE GROUND LINE INSTEAD OF ENDING ON THE GROUND

muhoja chanzi — Mon, 10 Feb 2020 15:34:57 GMT

Have been creating cross sections some of the cross sections have exceeded the ground line

And the other one creates designed line on the left

Please Help i need this solution

Plan and Profile Generator

doig86 — Wed, 08 Oct 2014 14:37:44 GMT

Where do i begin with this?

Looking through my course notes, they don's seem to explain what this option does and what default files i should load.

Regards

Chris

PROFILE DOES NOT SHOW IN THE FRAME

muhoja chanzi — Sun, 02 Feb 2020 10:19:40 GMT

tried creating plan and profile layout along alignment it only draws the plan and does not show profile.

when i click apply it changes the profile column to plan and also it generates empty frames with nothing in it.

Also sometimes when i change it from layout grid to layout along alignment it draws only the plan

i also attach these files for any further assistance please help.

communities.bentley.com/.../LIGOLA-ROAD-DESIGN-PROJECT.rar

Expecting help soon