CAGRI AYDIN

Yes this issue exists in the currently released version. We will address it in the software ASAP.

As I said, this is happening due to an issue in the application which needs to be fixed by the development team, As of now, ANL files should be checked for the deflection check results.

You should check the Output file (.ANL).

Only physical model can be converted into analytical model as of now, but not vice versa.

We are now in 2019 and this enhancement still has not been included. Please put to the top of the list!

I have to admit, I do sometimes wonder when old threads like this come up again, after 6 or more years, if Bentley's development "team" is just one poor sleep-deprived guy trying to maintain and improve several product lines simultaneously. That would…

The value (f1) is used by the program to calculate the axial deformation in members or volume expansion in plates and solids due to temp change, The second value (f2) is used by the program to calculate the bending affect due to the temperature change…

If you are using STAAD.Pro CONNECT Edition, open the STAAD.Pro start up page, then go to Configure -> File Format and make sure that all options under 'Single Line Format Command' are unchecked. To avoid errors shown in your screenshot, make sure that…

Hi, in addition to my "still-unanswered questions!!", today I observed, in the "bolted flange connection" the location of continuity plates is wrong. they should be continued along the cover plate. but RCSA draws them at the level of beam flanges. anybody…

I have confirmation from the product manager on your various points. II) when we design an RBS connection, in the 3D view, the weld access hole seems has the special form in accordance with "AWS D1.8 (=alternate geometry)", but in DXF view it has regular…