Chris Munoz's Activities

Openroads ConceptStation

Chris Munoz — Thu, 22 Oct 2020 20:50:22 GMT

Is development still going on for this product? I dont think ConceptStation has been updated in a year?

Thank you

Terrain State is invalid - Terrain MUST be Valid and Triangulated for this tool?????

Chris Munoz — Wed, 15 Apr 2020 20:10:54 GMT

I created the surface below from my corridor by selecting the 3D elements, but when I attempt to export the surface to a TIN, XML, DTM. I get the error mentioned in the title. How do I go about making this terrain valid? I have already removed rules from this surface.

Thank you

Bentley ACCELERATE Civil Conference

Chris Munoz — Tue, 10 Mar 2020 20:03:05 GMT

Will the Bentley ACCELERATE Civil Conference be rescheduled?

ConceptStation Development?

Chris Munoz — Tue, 04 Feb 2020 18:26:46 GMT

Is development still going on for ConceptStation? It looks like there has not been an update since 2018.

Thank you

Why are there gaps in my linear template?

Chris Munoz — Tue, 28 Jan 2020 20:18:18 GMT

I am not sure why there are gaps when I apply a linear template, the alignments/profile are obviously connected.

Thank you

Top Surface/TIN issue

Chris Munoz — Mon, 27 Jan 2020 23:41:44 GMT

Has anyone else had this issue before? My corridor behaves like it is supposed to in this super elevated transition area but the yellow line on the right side is the top surface that Openroads generates. Also when I export to a TIN file it is doing the same thing, ignoring the gutter line thru this area.

When I export a TIN file for our subs this will give them incorrect elevations.

Thank you

Opensite to Openroads

Chris Munoz — Mon, 16 Dec 2019 14:34:44 GMT

Do we have the ability to model an intersection in Opensite and then link that model to an Openroads corridor model? Or do we have to export Opensite to a tin/xml and then create a complex surface in Openroads?

Thank you

Proposed ground not rpicking up all of the points from the corridor/templates

Chris Munoz — Fri, 06 Dec 2019 17:13:00 GMT

I am having the issue shown above with my proposed ground. I generate the proposed ground from my corridor but it is obviously ignoring some of the points. So when I pull elevations there appears to be no curb in some locations.

The thin white line in the cross-section view is supposed to be my proposed ground. But it is ignoring the gutter on the right and tiying into the top of the curb and doing the same on the outside left curb.

Civil cells in ORD

Chris Munoz — Mon, 14 Oct 2019 16:05:10 GMT

Will we be able to use our civil cells created in SS3/SS4 in Open roads Designer?

Thank you

Insert SHP but show data

Chris Munoz — Thu, 13 Dec 2018 19:01:16 GMT

I have shape files from clients that have data for pipe sizes and slopes in the file. But when I reference this file into ConceptStation all it displays is the line work of the shape file and displays the pipes as lines not pipes with diameters and slopes.

Can we get ConcoetStation to read and display the data?

Thank you

What If...

Thu, 13 Dec 2018 19:01:16 GMT

Share an idea with the community

ConceptStation development

Chris Munoz — Wed, 17 Oct 2018 15:20:16 GMT

Is there still development work going on with Openroads Conceptstation? There has not been an update in a while.

No cross sections stored in design file message

Chris Munoz — Tue, 18 Sep 2018 15:10:39 GMT

I have cut cross sections in my design file and the alignment and profile are there in the same file, but when I try to use the cross section navigator or label-er I get the message below.

I am using Power GEOPAK V8i 08.11.09.878

Quick way to search cross sections

Chris Munoz — Tue, 08 May 2018 21:26:25 GMT

Is there a quick way to find specific cross sections once they are cut and put on sheets in SS4?

I know we have the cross section viewer to look up and down the model in SS4, but is there something similar to the cross section navigator that was in SS2? When you cut cross sections with the new Openroads tools and use the sheet method instead of stack, you no longer have SS2 cross section cells so we cannot use the cross section navigator to search to a specific station.

Is there a tool to be able to quickly search to a specified cross section after they have been cut using the sheet method in SS4?

Good Idea!

Wed, 21 Mar 2018 18:11:19 GMT

Receive 10 upvotes for an idea