Chris Munoz

I select the "all" option on the Import dialog and it is successful. If I select Project Extents then it fails. That tells me your coordinates are different in the dgn file versus the db file. Check the x,y,z on a point in the dgn file and the same…

If you are wanting this type of functionality, I can file an enhancement request for you that development will review for future releases.

Hi Chris, Have you tried opening the GIS data into a dgn, then importing the dgn into ConceptStation? I don't have GIS data of a pipe network, but I was able to create pipes in Power InRoads SS4, and import the dgn into ConceptStation and see different…

Yes, here's the link to our announcement.

Hi Chris, You can have them all in one model if you use the Custom cross section dialog box. Notice that I have a Station Range to run cross sections every 100' across my entire alignment. Then, I added cross sections at specific stations…

The cross sections are not tied to the design model for SS4. There is a Dynamic Cross Section view in SS4 that allows you to dynamically see changes from the design model. However, if you cut cross sections, makes changes in your design, you will have…

We haven't released an update for ConceptStation yet, but the issue should be resolved when it is available. It is expected to be released within the next few weeks.