• RE: 关于RAM Connection 11 standalone 采用国标材料设计的问题

    您好!造成您描述的问题的原因是,当前美国角钢中的类别很多,具有 L LU T2L和T2 LU类型截面;而中国截面库中的角钢只有单角钢截面的原因。用户是不能直接干预已有国家的节点库。但您可以通过添加属于自己的构件截面库来进行双角钢的添加。 自定义构件截面数据库方法请参考这个帖子: https://communities.bentley.com/communities/other_communities/chinafirst/w/chinawiki/43308/ram-connection 如下图所示…
  • 普通钢结构如何导出材料表

    【问题概述】 对于采用SSDD建模的门式刚架结构,SSDD提供选项“设计-构件材料表”可以得到模型中各类构件的材料统计表格,那么对于STAAD中建立的普通钢结构应该如何统计模型的材料表?又该如何按照用户指定类别进行统计?统计得到的材料重度是如何计算得到的?本文将针对这三个问题进行一一解答: 问题 1 :普通钢结构如何统计模型的材料表? 问题 2 :如何按照用户指定类别进行统计? 问题 3 :统计得到的材料重度是如何计算得到的? 【解决方法】 问题 1 :普通钢结构如何统计模型的材料表…
  • 请问如何在同一个模型中定义多个质量工况?

    请问如何在同一个模型中定义多个质量工况?
  • 请问大家组合梁腹板在staad中可以建模并且计算吗?

    请问大家刚规范GB50017-2003中4.4.1所说的组合梁腹板在staad中如何建模,其构件强度、整体稳定和局部稳定如何计算?例图中类似 感谢回复!
  • RE: ProStructures学习资料

    您好, 请依次根据图片登陆ipad版Bentley LEARN程序后,查找自己感兴趣的产品学习视频,点击右上角Add to My Offline Course,下载完毕后即可离线观看。
  • Structural Products and the CONNECTION client

    Applies To Product(s): RAM; STAAD Version(s): CONNECT Editions Area: General; Installation What happens if I don't sign in to Bentley Service through the CONNECTION client? With most CONNECT Edition or…
  • RE: Floor Load Error

    Please use the SET FLOOR LOAD TOLERANCE command as shown next. INPUT WIDTH 79 UNIT FEET KIP SET FLOOR LOAD TOLERANCE 0.083 JOINT COORDINATES This ensures that all nodes that are part of the floor groups are within a tolerance level for the floor load…
  • SSDD Substation 新版发布

    SSDD Substation 是专门用于中国规范变电构架设计的STAAD.Pro后处理程序。它包含如下几个模块: 荷载向导:基于 DL/T 5457 《变电站建筑结构设计技术规程》, GB 50011-2010和 GB 50009-2001等规范,支持地震反应谱生成,变电构架的风荷载生成,变电构架的荷载自动组合。 规范检验:这是一个通用的普钢检验模块,其中包含了 GB 50017,GB 50011以及 DL/T 5457-2-12 等规范条款的检验模块。同时支持构件的优化功能。内置了根据DL…
  • DIRECT ANALYSIS AND ITS IMPLENTATION IN STAAD.PRO

    Applies To Product(s): STAAD.Pro CONNECT Edition Version(s): All Environment: N/A Area: Analysis Solutions Subarea: Direct Analysis Original Author: Biswatosh Purkayastha…
  • RE: Undergraduate student question on STAAD

    If the reason for modeling the deck is just to distribute the loading to the beams, you do not need to model it. There are loading options in STAAD.Pro like FLOOR LOAD and MOVING LOAD that would allow you to apply loads and these loads can be distributed…
  • 7 Great Reasons to Attend Special Interest Groups!

    Bentley’s Special Interest Groups (SIGs) are monthly virtual meetings, led by an expert, that cover various topics on some of our most popular products including MicroStation, ProjectWise, and more. Is this your first time hearing about SIGs? No worries…