Jarred. Robinson's Activities

Importing Geometry from GPK isn't Working Correctly

Jarred. Robinson — Tue, 27 Aug 2019 16:04:59 GMT

I have a model in openroads that was created off of imported geopak profiles. This model has been updated many times with this same gpk and it correctly replaced the previous profile. However, for some reason in the last two weeks when I import the new profiles, they show in the openroads file, are active, but the model does not follow them correctly. There are phantom lines that show up if you hover over them that show bits and pieces of the previous profile. The only solution thus far is to deactivate the new profile, delete everything, including all the old invisible profile lines, then reimport the new profile.

On top of this, some of the new profiles will come in only 80-90% correct. The elevations for each PI will be correct, but many will be on the wrong station. Again, I can fix this by manually selecting each PI and editing the station to match what it should be, but on a 5 mile long project, this takes time and leaves a large room for error.

The first picture shows the PI when imported into openroads from the gpk. Remember, this profile has been imported before and been fine, only minor changes have been made between each import:

This second picture shows where it should be based on the gpk, I manually edited the station to get it into place.

The third picture is the geopak output:

Here is another profile that shows part of the spline being relocated above some other points:

Has anyone experienced these issues?

William

Openroads running extremely slow. Freezes up on simple things

Jarred. Robinson — Fri, 14 Dec 2018 16:12:32 GMT

When I first had Openroads installed on my work PC, it was great! There were no features or setting up and running, but everything was fast, the program was much more efficient with my processor, I was happy. That was a few months ago, now, after a few updates it runs crazy slow. Now when loading the "Create Template" dialogue, it will seem like it crashes every time, but if I let it sit long enough (45 minutes, not joking) it will come back and have the template interface running. The best thing is that I have to convince a project manager soon that this program is as great as I said it was before. If I cannot, we will revert to InRoads, which I really....REALLY do not want to do.

I am part of a relitively large company, so we work on large servers that I can not edit settings on since I do not have access. However if it does come to that point, I know who to contact in case the problems point to that.

If anyone could help with this problem, I would greatly appreciate it. My current version is 10.03.00.43

Ask A Question I

Fri, 14 Dec 2018 03:27:34 GMT

Ask a question in a forum.