Apostolos Koursaris

RE: On Report and Material Data to steel design section is not according the model selection

Modestas

There must be a CHECK CODE command after the design parameters in order to consider those design parameters for the design.
- 10 months ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
RE: Wind Loads on X axis are not shown with the default arrows

Modestas

Try to change the scale of the loadings. This can be done in View -> Label Settings -> Scales. For wind load, try changing Dist. Force option.
- 10 months ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
RE: Error during analytical model creation from physical modeller

Modestas

In the Physical Modeler go to Model -> Integrity Check. In the opened dialog click Validate button and then Delete button. Duplicate and orphan nodes will be removed. Now try to import the model into the Analytical Modeler and see if that works.
- over 1 year ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
RE: staad pro physical modeler- loads on the ribbon are freezed and cannot be selected

Modestas

Go to the Loading menu and check what load is selected (active load case). If it is a combination or a load from load generator (i.e. seismic or wind) then other loads cannot be added to such load cases or combinations and they are not active. If you…
- over 2 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
RE: ** ERROR: UBC LOAD CASES MUST BE DEFINED BEFORE ANY OTHER LOAD CASE. **

Modestas

In that case move the Analysis 2 set (the one with the seismic loads) to be as a first set in the list.
- over 2 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
RE: Staad Physical Modeler Problem

Modestas

This video was prepared with an old STAAD.Pro CE version which did not have a possibility to create a Load Cases in the Physical Model. In the most recent versions you can create Load Cases in the Physical Modeler, that's why Add button is not active…
- over 2 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
RE: Fail to switch from physical model to analytical.

Modestas

Go to Spreadsheet -> Properties in the Members group. In the Member Properties table, see that many members have sections like UPN200(2), UPN200(3), etc. Make sure that all these members have section properties without (1), (2) or (3). I.e. change UPN200…
- over 2 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
RE: UPN 200 not available. Only the type that is indicated in the snapshot is there.

Modestas

It looks OK at my end. Which STAAD.Pro version are you using? If not the latest one (22.07.00.160), please upgrade and see if that solves the issue.
- over 2 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
UPN 200 not available. Only the type that is indicated in the snapshot is there.

Apostolos Koursaris

Hello dear Staad Pro community. On the selection of my prefered section , i cannot find the normal UPN 200. As you can see i have chosen european catalogue. The same issue is there for UPN 160 and UPN 380 as well. For better understanding please check…
- Answered
- over 2 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum