• Civil Updates Available

    For those of you who may not have heard, a SELECTseries 2 Civil Update (08.11.07.566) is avaiable for GEOPAK, InRoads and MX. The update (not a full install but a true update) can be downloaded from the Select Services downloads page. Here are a few…

  • Clipped Components not honored in end area volume computation

    I have used the variable manager to use mesh generation in an attempt to get clipped components to display as shapes for end area computations. I have a road with three driveways and all fall on cross section intervals. The are setup to clip the main…

  • Create Cross Section Sheet

    Applies To Product(s): GEOPAK Road PowerCivil Site Version(s): All Environment: N/A Area: N/A Subarea: N/A Original Author: …

  • create Style sheets/xml reports?

    With InRoads v8i, is it possible to create your own style sheets(.xsl) for the InRoads Report Browser? I'm seeing people talk about customizing these xml reports. Where can i get more style sheets to use, or is it possible to create your own? Any help…

  • Deleting Surface Points

    Applies To Product(s): InRoads Version(s): 08.05.XX.XX and 08.07.XX.XX Environment: N/A Area: N/A Subarea: N/A Original Author…

  • InRoads Abutment Grading

    Hello, I'm working on a ramp leading up to a bridge - so far so good, but I'm not sure how to handle the abutment. There are 2 retaining walls/wing walls projecting approx. 90 degrees back from the abutment - the 2:1 side slopes dead end into the…

  • MicroStation V8i System Requirements and Hardware Recommendations [TN]

    Product: MicroStation Version: V8i Environment: N\A Area: Hardware / Input Devices Subarea: N/A NOTE: This is accurate as of the date it was published. Advancements in technology may supersede…

  • Print Text Substitution

    (Portions of this article apply to MicroStation V8i) Setting aside the more sophisticated capabilities of ProjectWise InterPlot design scripts and ProjectWise title blocks, there are four main techniques in standard MicroStation to replace design…

  • Toolboxes disappear

    Applies To Product(s): MicroStation Version(s): V7, V8, V8 2004, V8 XM, V8i Environment: N\A Area: GUI Subarea: Docking / Resizing Original Author: Todd Cassell, Bentley…

  • Unable to update the Cross Section set after regenerating the surface with the Create Surface command

    This issue occurs when regenerating the surface with the Create Surface command with “Empty Design Surface” toggled on. This empties the design surface and recreates the components, features, etc of the surface with new GUID numbers. When this occurs…
Communities
Support and Services
Training and Learning
Social Media