quad perspective's Activities

3D Mesh Production - Random Tiles STUCK at 32% - 33% ! HELP

quad perspective — Tue, 09 Mar 2021 11:53:52 GMT

Hi guys, when processing drone dataset for 3D mesh in "High" Quality.

Random tiles gets stuck at 32% or 33%. And I have to close the CC Engine and restart. After which the tile is "Failed" and it continues with the next tile. Every 6-10 tiles, one tile gets stuck!! Some tiles were stuck for over 9 hours!

It usually takes 30 minutes to process 1 tile successfully.

Tile size is 120 meters, using regular planar grid.

Any suggestions??

System configuration: Intel Xeon, 128gb ram, nvidia quadro P2000

CC Update 16

Aero-triangulation on 10,000 - 20MP images - 3500 images failed! - HELP!

quad perspective — Sun, 28 Feb 2021 11:08:00 GMT

Hi guys, i am trying to process aero-triangulation on 10,000 (9,251) Drone images of 20 megapixel each . 186 gigapixel.

Out of 9251 images, about 3500 have not aligned. About 9 GCPs are used , just to place the model in correct position approximately.

3D grid: camera angle 45 degree with 70-70 overlap.

Workstation specifications: Intel(R) Xeon(R) W-2133 CPU @ 3.60GHz

128GB RAM

Nvidia Quadro P2000

Below is attached 2 pictures:

1. Total imported images

2. Aligned and failed images -- Aligned in Green. Failed in Orange

NOTE: Only Blue GCP's (9) are marked and used for processing. When processing Aero-triangulation GCP method was selected.

Any input or help is greatly appreciated!

Thank you!

Ask A Question I

Sun, 28 Feb 2021 11:08:17 GMT

Ask a question in a forum.

Can I do Aerotriangulation of 20,000 images each 20MP on a single computer with i7-7700K, 16GB Ram, 6GB GTX 1060Graphic Card? How can I achieve this process even with multiple computers?

Manish Sahu — Tue, 29 Aug 2017 12:38:01 GMT

I want to do aerotraingulation of 20,000 aerial images taken with sony a6000 Camera, 20MP camera. How to complete this process. Please suggest?